Exhaust Hangers (rubber Type)

[MrG 3]

not really a mod as such but what do people use on their track 205's to hang the exhaust? Do you use the std offerings or some similar to the ones on ebay (Poly type). Mine are showing signs that they could do with replacing, so do I go std or poly type?

 

Thanks

 

Andrew

[Batfink 201]

Standard move about too much in my opinion. I run uprated ones that are about 30% stiffer vs standard

[MrG 3]

where did you get yours from? Someone on here or via ebay like these?

 

ebay exh link.

Edited February 24, 2009 by MrG

[Cameron 16]

Yeah don't bother with standard ones, they're good at first but then sag really badly after a little while.

[Batfink 201]

I get mine through work

 

Those ebay ones look cheap, cant vouch for quality though but its a well established seller...

[pug_ham 244 3 Cars]

I use standard ones wrapped with a cable tie.

 

Graham.

[MerlinGTI 3]

Ive got those ebay ones on my car They are better than standard but not as good as Powerflex ones I had on my MK3 Escort. They were much more substanial.

[S@m 156]

Yeah the Poly ones definetly reduce exhaust movement a fair bit, did on my 306 anyway. So i guess they are worth the money if thats what you want from them!?

[flipperthebushkangaroo 2]

Do the poly ones increase noise or vibration levels? (I'm due a new backbox but don't want extra noise and vib) or do they only reduce movement?

Also anyone know where i can get a reasonable, cheap standard backbox .

Sorry to hijack.

Roddie

[S@m 156]

Hmmm, i suppose that i did notice a slight increase in noise and vibration, nothing too drastic though. Got rid of the noise of the backbox continually hitting the bumper so i was quite content!

Sam

[MrG 3]

cheers for the replies guys, I've ordered a set off ebay so we'll see how they fare.

[richsmells 2]

I use standard ones wrapped with a cable tie.

 

Graham.

 

Good idea! *grabs cable ties, goes outside....