Harness Eyelet Bolt Question

[iamjackiechan 0]

hi

i was just wondering, when fitting the plate on the underside of the car do you fully weld them on or just tak it in.

will

[Tom Fenton 1,549]

More than just a tack, but not fully seam welded, thats what I do anyway.

[Jrod 7]

Never even tacked them myself, just do them up.

[iamjackiechan 0]

thats what i was thinking, welding them in isnt going to make a huge amount of difference.

just going to stop any movement

[Slippy 0]

If you are using the threaded plates then use a bit of thread lock and nip them up TAF

Edited February 5, 2009 by Slippy

[tracktoy 0]

there is normally a small hole in the corner of the plate to take a rivet or screw to hold them in position

 

they dont need to be welded but would be stronger if they were