Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Guest Wheres_my_wig

Gti-6 Front Brake Conversion

Recommended Posts

Guest Wheres_my_wig

Quick question, Im going for the GTI6 front brake conversion, with gti6 master cylinder and keeping the rears standard with new disks and pads... also looking at getting a set of braided hoses. Are the kits for the 205 gti 1.9 going to fit the gti6 calipers or vice versa. Im just not sure which ones to go for. any idea would be welcome. Great threads on all this by the way!!

Share this post


Link to post
Share on other sites
Peetypug

they wont fit the fronts as they will be too short iirc.

Miles does longer ones and they are very good.

Share this post


Link to post
Share on other sites
Andy F

Speak to miles

 

im sure he sell a set suitable for the 205 to fit the 306 gti-6 calipers

Share this post


Link to post
Share on other sites
Spiky

or just make your own :)

 

 

they easy to make

Share this post


Link to post
Share on other sites
Rock Lobster

You need any special tools to make your own? Didn't realise there was a diy option!

Share this post


Link to post
Share on other sites
Spiky

nope

 

some 11-13 brake spanners (normal ones will do the job though)

think blade on an angle grinder, or a VERY sharp metal chisel (hammed for chisel too)

masking tape (to wrap the braid before cutting stops fraying)

tiny screw drvier or bradol to open up braid

 

thats it i think :)

Share this post


Link to post
Share on other sites
Rock Lobster

This is good news! Will definately give this a go as i need custom legths so off the shelf kits will be no good. Can anyone reccommend somewhere cheap to get all the neccercary bits and bobs from?

 

cheers, your help is appreciated!!

Share this post


Link to post
Share on other sites
Spiky
Rally Design Edited by Spiky

Share this post


Link to post
Share on other sites
Rom

How much further do the Gti 6 calipers sit ?

My hoses fit fine with 307 Hdi calipers.

Share this post


Link to post
Share on other sites
mrswampy

I can also supply not only standerd sets of braided hoses

 

along with custom made ones

 

all at very good prices along with excelant quality.

Share this post


Link to post
Share on other sites
Mikey S

are the braided 1.9 gti hoses shorter than the original rubber ones then? as i have fitted '6' brakes on my laser with standard 1.9 hoses and not had any problems with them :blush:

Share this post


Link to post
Share on other sites
mrswampy

No the braided standerd lines are the same length

 

the normal hose will fit and do the job

 

but

 

upon extremes of steering and or suspension travel the hose may get pulled or stretchd which in extreme cases cause failure of the hose

 

this may also if pickd up on lead to an mot failure

Share this post


Link to post
Share on other sites
Mikey S
No the braided standerd lines are the same length

 

the normal hose will fit and do the job

 

but

 

upon extremes of steering and or suspension travel the hose may get pulled or stretchd which in extreme cases cause failure of the hose

 

this may also if pickd up on lead to an mot failure

 

 

mine certainly arent stretched to the extreme on full lock or on maximum suspension droop, there still quite plyable, and im an mot tester.

Share this post


Link to post
Share on other sites
Miles

I cannot recall the HDI caliper from memory but it's not far off the Gti6 one, I know there's not allot in it so the little extra length makes a huge differance but then again aftermarket std hoses might be different too knowing what there like,

Having seen the GTi6 one's on std hoses it does give a slight bend on full lock on full droop not something I'd be happy with and hence why any converted car I fit these 2 get's these pipe's, May sound like a sales pitch but for the money it's hardly making me anything

Share this post


Link to post
Share on other sites
mrswampy

As miles says

id rather spend or advise you spend a few quid to do the job correctly than run the risk of a brake hose failure

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×