Fuel Pump Setup For Running Carbs?

[cherry_red 0]

If I run carbs will I have to remove the injection fuel pump located in the fuel tank?

 

I have a facet silver top fuel pump and a fse pressure regulator, will I be able to just put them inline from the original OE configuration to adjust the pressure down? Or is it essential I remove the injection fuel pump?

 

[jplautomotive 0]

some people will say yeah some say no

 

i have left my injection one in and put a regulator in that takes it from about 60 psi down to 5 psi

 

 

jonny

[mmt 15]

Take the high pressure pump out og its housing an put in a copperline(to suck up fuel) in the housing instead of the pump. Then you don´t need a regulator to adjust the pressure from 60 to what you need.

[dimmapalmer 0]

i got 2 regulators on mine, one to take off the main pressure, one for fine tuning!